Specifications for the Mixers Australia MA 9m Midweight Hydraulic Transit Mixer
Customer Reference: Re: Steel tensile strengths
250 grade steel – AS minimum 410 megapascals
350 grade steel – AS minimum 450 megapascals
K1042 alloy – AS minimum 610 megapascals
BOWL
a SKIN
4mm alloy K1042.
b MID SECTION
4mm alloy K1042.
c FINS
4mm alloy K1042 mixing chamber
4mm alloy K1042 end cone
d FLARES 6mm 250 grade steel.
e DISHED END 10mm 350 grade steel.
f MANHOLES Two (2) with ID to suit WH&S standards.
g BOWL GUARD
Fitted to all mixers for operator safety.
h GEARBOX FLANGE
RING
24 x high tensile M16 10.9 bolts replace older type 12 bolt flange. Reduces risk of bolts working loose or breaking. (Please note : 24 bolts only to be used with latest ZF Gearbox).
i BOWL ANGLE
13.8 deg.
j TRUNNION RING 75×40 FMS fully linished to achieve smooth operation.
FRAME
a CHASSIS RAILS
76x76x6mm
b FRONT PEDESTAL
5mm 250 grade steel fully welded inside and out including gussets on inside. Gearbox mounting plates on pedestal machined to tolerance with gearbox. Pedestal fully welded to chassis including angle cross member.
c REAR A-FRAME
4mm 250 grade one (1) piece folded section, a-frame top support plate 10mm, two (2) full internal 5mm baffles and two (2) 10mm gussets under top support plate. Trunnion roller brackets fabricated from 12mm 350 grade material including two (2) gussets per bracket. Bent arm box mounting supported by two (2) internal gussets.
d BANANA CHUTE
3mm 250 grade steel.
e SQUARE LOADING HOPPER
3mm 250 grade steel with height adjustable hopper channel.
f CHUTES
No. 1 – 3mm 250 grade steel
Nos. 2, 3 & 4 – RHS frame and 6mm ultra high molecular weight polyurethane inserts.
g CHUTE JACK Chute Jack or Hydraulic Ram
h CHUTE LOCK Brake shoe
i TRUNNION ROLLERS
Steel with grease nipples fitted to outside of a-frame for ease in greasing.
j CHUTE RACK
Bolts on double chute rack.
k GUARDS Rolled aluminium or Plastic
l LADDER & PLATFORM Mixers Australia pull down aluminium ladder meeting Australian Standards AS 1892.1–1996 and AS 4324.1-1995.
m MIXER TRAY 6mm ultra high molecular weight polyethylene 1000 grade.
HYDRAULICS
a GEARBOX
ZF4300.
b PUMP Rexroth 90cc Manual or Electric.
c MOTOR
Rexroth 63cc.
d HOSES
ALL MADE TO SAE SPECIFICATION.
5.4 1¼” suction 600 PSI burst pressure.
100R9R 1” pressure 16800 PSI burst pressure.
Both pressure hoses tagged for ease of identification and warranty traceability. 100R6 ¾” return PSI burst.
e JACK SHAFT
Heavy duty – 1410 series.
MISCELLANEOUS
a WATER TANK
Pressurised 200 litre aluminium complete with pressure relief valve, regulator, check valve and low air safety valve.
b WATER GUN Top and bottom.
c CONTROLS Cables or Remote.
d FOLD DOWN STEP Opt
e SLUMP GAUGE Opt
f WATER METER Opt
SANDBLASTING AND PAINTING
a SANDBLASTING Class 2.5 and contaminants removed.
b FIRST COAT
TOP COAT
Zincanode 402
One Colour.
WEIGHT
a WEIGHT Approximately 3540kgs including 200ltrs of water and all hydraulic oils. Each mixer is individually built to suit the truck, therefore there can be slight weight variations.
